User Manual for Volt-80

There are some precautions after receiving volt.

FN + ScrLK: Backlight mode switch
FN + ↑: The total brightness of the keyboard is increased, and 5-stop adjustment is supported
FN + ↓: The total brightness of the keyboard is reduced, and it supports 5-stop adjustment
FN + →: The speed of the light effect is accelerated, and 5-stop adjustment is supported
FN + ←: The speed of the light effect is slowed down, and it supports 5-stop adjustment

The above control methods support long-press continuous adjustment, single press once to adjust a gear, long press to continuously adjust the gear, when adjusted to the limit value, the indicator light flashes 5 times to indicate.

Bluetooth / USB wired settings
FN + P (short press) Bluetooth / USB wired mode switch. (Full key light flashes white for 5 seconds)
FN + P (long press for 5 seconds) enters Bluetooth pairing mode. The P key flashes white continuously during pairing, and stops flashing after successful pairing.
FN + Q / W / E / R / T supports storage of 5 groups of Bluetooth devices.
 
Bluetooth connection method
1: Turn on the switch below the space (the upward direction is the opening, and it is not necessary to turn off if it is not used for a long time after opening, the standby power consumption is very low).
2: FN + P (short press) to switch to Bluetooth mode.
3: Select one group of Bluetooth via FN + Q / W / E / R / T,
4: Press and hold FN + P for 5 seconds, at this time the P key continues to flash, indicating that the Bluetooth pairing mode has been entered
5: Search the computer / mobile phone (device name Demo S) and connect the device. After the connection is successful, the P key stops flashing and is completed.
 
If using Bluetooth connection, please switch the keyboard to Bluetooth mode, if using data cable connection, please switch the keyboard to USB wired mode. Otherwise, the keyboard cannot be used normally.
 
About charging. Plug in the USB cable to automatically charge
1: During charging, the monochrome backlight under the space bar lights up.
2: After being filled, the monochrome backlight under the space bar goes out.
3: If there is no operation for 1 minute, the keyboard backlight will automatically turn off and go to sleep (saving power). At this time, press any key to wake up and continue to use.


Multimedia and special key functions
Fn + F1: My computer
Fn + F2: Homepage
Fn + F3: Email
Fn + F4: music player
Fn + F5: Previous song
Fn + F6: next song
Fn + F7: Start / Pause
Fn + F8: stop
Fn + F9: Volume increase
Fn + F10: volume down
Fn + F11: Mute
Fn + F12: calculator

Lighting control:
FN + 1/2/3… 0 are light effect adjustment
Fn + (↓): keyboard backlight brightness adjustment, 5 levels adjustable, decrement / close
Fn + (←): Speed ​​adjustment of light effect, deceleration, 5 levels adjustable
Fn + (-): Speed ​​adjustment of lighting effect, acceleration, 5 levels adjustable
(Caps / win / ScrLK key will flash three times after adjusting to the limit value for prompting)
FN + Left WIN: WIN key lock function, the corresponding light turns white after locking
FN + ESC: Press and hold for 3 seconds, the full keyboard backlight flashes 5 times, restore the factory default settings Caps / WIN / ScrLK lamp is an independent control unit, and it also functions as an indicator.

Search